[. . . ] Compliance with standards -- The appliance complies with the internationally approved IEC safety regulations and can be safely cleaned under the tap. -- This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today. Charging Charge the appliance for at least 1 hour before you use it for the first time or after a long period of non-use. [. . . ] Tip: Use different settings to create a natural and smooth transition between the various hair lengths from your neckline to the top of your head. English Do not turn the length setting adjustment ring beyond the highest setting. 3 Turn the swivel head to the position that is most comfortable for your arm when you clip the different parts of your head. Using the swivel head -- From its starting position of 0° (pointing forwards), you can turn the swivel head 45° or 90° to the left or right. This enables you to adjust the position of the cutting element to the part of your head that you are clipping. 9 -- To set the cutting element to the desired position, turn the swivel head (‘click’). € 3 mm – 5 – 7 Note: Always adjust the position of the cutting element by turning the swivel head. Note: Do not turn the swivel head more than 90° to the left or right. -- The swivel head allows you to hold and use the appliance like a styling comb. If a lot of hair has accumulated in the comb attachment, remove the comb attachment from the appliance and blow and/or shake the hair out of it. When you remove the comb attachment, the selected setting does not change. € 3 mm – 5 – 7 – 9 – 11 – 15 3 Rinse the comb attachment under the tap or clean it with the cleaning brush supplied. 4 Place your thumb in the center of the round side of the cutting element and your index finger on the teeth of the cutting element (1). Use your index finger to lift the cutting element from the swivel head (2). 5 Rinse the cutting element under the tap or clean it with the cleaning brush supplied. English 6 Rinse the inside of the appliance under the tap or clean it with the cleaning brush supplied. 13 7 Insert the lug of the cutting element into the slot (1) and push the cutting element back onto the swivel head (2). Cleaning the shaving head Note: Regulary check the shaving foil for cracks. 2 Press the release buttons on the shaving head (1) and remove the shaving foil from the shaving head (2). €  Note:To clean the shaving head with the cleaning brush, brush the inside and outside of the shaving head and the outside of the shaving foil. To remove cut hairs from the inside of the shaving foil, tap the bottom of the shaving foil gently on a flat surface. 14 English Storage 1 Switch off the appliance and disconnect it from the mains. [. . . ] 1 Disconnect the appliance from the mains and let the appliance run until the motor stops. 4 Use a screwdriver to remove the rechargeable battery from the appliance. Guarantee and service If you need service or information or if you have a problem, please visit the Philips website at www. Com/support or contact the Philips Consumer Care Centre in your country. [. . . ]